Panasonic CZ-RTC2 Programming Steps page 3

Hide thumbs Also See for CZ-RTC2:

 "P1" is for setting the hour the unit will be turned on. Press

the "UP" or "DOWN" TIMER KEY and set the hour.

Once desired hour is shown then press the "SET" KEY and

 "P2" is for setting the desired minutes. Using the "UP" or

"DOWN "TIMER KEY, set the desired minutes, then

press the "SET" key.

 Now "P3" will be displayed and is for setting on and off

times and the desired temperature set-point.



 Using the UP KEY ONLY of the "UP" or "DOWN"

ARROW KEYS will toggle between on or off and the

temperature set-point.



 By default the "ON" icon will be flashing.

 Press the "UP" arrow once and the "OFF" icon will appear.

 Press the "UP" arrow again and the "ON" icon will appear

and you can now set the temperature set-point with the

"UP" or "DOWN DAY KEY.

 Press the "UP" arrow again and you can set the temperature

set-point only with the "UP" or "DOWN ARROW KEY.

 Press the "SET" KEY to complete.

 Press the "CANCEL" KEY to exit the programming.

Note: Each day of the week that has a set timed on or off function will

be represented by a black line under its particular day of the week.

Example:

will appear on the LCD display.

This icon represents the "OFF" position.

This icon represents the "ON" position.