Panasonic CZ-RTC2 Programming Steps page 4

3. Copying program from one day to the next: First press the
"PROGRAM" KEY. Make sure the desired day of the week to
be copied is highlighted by using the "UP" or "DOWN" DAY
ARROWS.
"PROGRAM" KEY one more time and the following will be
displayed.
the "UP" or "DOWN" DAY KEY to select the day you wish to
copy to. Press the "SET" KEY. Press the "CANCEL" KEY to
return to normal operation. Repeat the above steps to copy to each
day of the week you wish to copy to.
4. Turning off the timer without deleting the timer program:
To keep the system from following the programmed On/OFF time schedule,
press the "CANCEL" KEY for 3-4 seconds and the following will appear
in the LCD window.
press the "CANCEL" KEY for 3-4 seconds until the
disappears from the LCD window.
5. Deleting the Program Timer:
 Press the "PROGRAM" KEY once.
 Press the "UP" or "DOWN" DAY KEYS to select the day you want
to delete.
 Press the "UP" or "DOWN TIMER KEYS to select a timer number.
(From 1-6).
 Press the "SET" KEY to display the P1 programming mode.
 Press the "DELETE" KEY to delete the program.
 Press the "CANCEL" KEY to exit.
Now press the
Press the "SET" KEY. Now use
To re-enable the programmed time schedule
emblem