Changing The Programme Sequence; Payment System; Once A Programme Has Started; Changing The Programme - Miele PT 7135 C Vario Operating And Installation Instructions

Changing the programme sequence

Payment system

Opening the door or cancelling the
programme after it has started may
cause a loss of credit (depending on
how the tumble dryer was set up)*.
* Either during the commissioning
process or subsequently, a Miele ser-
vice technician can re-set the payment
system so that programming changes
can be made.

Once a programme has started

- changing the programme

You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.

- cancelling the programme

^ Press shortcut button G Cancel.
On some programmes, laundry will
be cooled down if a certain
temperature has been reached.
If shortcut button G Cancel is
pressed again, Finish appears in the
display.
^ Open the door.
^ Close the door.
^ Immediately select the programme
you want, and then start it.
30
Adding or removing laundry
after a programme has started
,
The laundry, the drum and the
back of the tumble dryer all become
very hot during operation. Take care
when in the vicinity of the appliance,
when opening the door and
handling freshly dried laundry.
Danger of burning.
^ Press shortcut button G Cancel.
On some programmes, laundry will
be cooled down if a certain
temperature has been reached.
^ Only open the door once the laundry
has cooled down completely.
^ Add or remove items as required.
^ Close the door.
^ Select a programme.
^ Press the Start button.

Power cut

– If the tumble dryer was switched off
during a programme or there has
been a power cut:
^ Press the OK button after switching
the dryer back on and start the
programme again.

Time remaining

The time left shown in the display may
now vary from the actual drying time.