Cadence Option; Information Functions Pulse - VDO MC 2.0 WL Instruction Manual

3.4 Cadence option

The cadence menu is only available if
the cadence transmitter has been installed.
B
the cadence transmitter has been selected
B
(see transmitter selection in sections 3.8 and 6.5).
the transmitter was paired during pairing.
B
Note: the heart rate and cadence cannot be received simultaneously.
3.5 Information functions, PULSE
This information is only available if the PULSe transmitter has
been selected and paired.
AVG PULSe: shows the average heart rate for the
current trip (since the last reset).
MAX PULSe: shows the maximum (highest)
heart rate for the current trip (since the last reset).
After pairing the cadence transmitter, the current
cadence is shown in area 2 of the display. In
function mode, the cadence information can
be accessed by pressing the button P/CAD
resetting the trip data also resets the cadence
data to zero.
CALORIeS: shows the calories burnt on the current
trip (since the last reset).
TIMe BeLOW: shows the time during which the
heart rate was below the lower limit set for the
training zone.
TIMe IN: shows the time during which the heart
rate was within the set training zone.
www.vdocyclecomputing.com
PL NL ES IT FR
MC 2.0 WL
ENG DE
>>> P06
P .
49