Assigning A Recording Function To The Front Shutter Button - Casio Exilim EX-FC500S User Manual

Assigning a Recording Function to the Front Shutter Button

(Front Shutter)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
Front Shutter
This setting can be used to assign the recording function to be performed when the
front shutter button is pressed while the camera is in the REC mode.
Setting
Standard
AF less
10s timer
2s timer
CS
Off
NOTE
• Front shutter button operation will become disabled while shooting with some
BEST SHOT scenes.
• For front shutter button operations in the PLAY mode, see page 131.
• When the "Front Shutter" setting is something other than "Off", the front shutter
button can be used to shoot a snapshot while movie recording is in progress
(Snapshot In Movie), In this case, however, only a single snapshot can be
recorded. You cannot shoot a Continuous Shutter (CS) image during movie
recording.
REC Screen Description (When front shutter button is
Icon Display pressed)
Normal recording using the current camera setup.
Half-pressing the front shutter button immediately
shoots a snapshot without adjusting focus, so
there is less time lag between shutter button
operation and shooting than there is when using
the top shutter button. If you want to focus (with
AF) before shooting, half-press the top shutter
button to focus. Next, press the front shutter button
to shoot.
This front shutter operation can be used for
shooting single snapshots only.
Image recording 10 seconds after the front shutter
button is pressed.
Image recording 2 seconds after the front shutter
button is pressed.
Recording of a series of up to 10 images at 10 fps.
This function can be used only when the recording
mode is Program Auto and the "CS" menu item
setting (page 58) is "Off".
No recording.
102
Advanced Settings (REC MENU)