Editing A Movie On The Camera - Casio Exilim EX-FC500S User Manual

Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
"p PLAY MENU" Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
Previous Cut
Intermediate Cut
Next Cut
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
3.
Press [2] to display the editing menu and specify one or two cut
points.
Previous Cut
Intermediate Cut
Next Cut
4.
Use [8] and [2] to select "Yes" and then press [SET].
The selected cut operation will take considerable time to complete. Don't try to
perform any camera operation until the "Busy... Please wait..." message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
Cuts everything from the beginning of the movie up to the
current location.
Cuts everything between two points.
Cuts everything from the current location to the end of the
movie.
While the frame you want the cut to be up to is
displayed, press [2].
While the frame you want the first (From) cut to be is
1
displayed, press [2].
Select another frame.
2
While the frame you want the second (To) cut to be
3
is displayed, press [2].
While the frame you want the cut to be from is
displayed, press [2].
136
Cut range (blue)
Other Playback Functions (PLAY MENU)