Table of Contents
Advertisement
IMPORTANT!
• Auto Focus is disabled when "MF" (Manual Focus) is selected for the focus mode
(page 45), even if you select an AF area.
• Selecting "O Tracking" can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
• With some BEST SHOT scenes, there are restrictions on the use of AF area
settings. Because of this, you may not be able to use certain settings or you may
not be able to specify any AF Area setting.
• While Face Detection (page 110) is turned on, regardless of the current AF Area
setting, "U Spot" (center) focusing will be used automatically whenever a face
cannot be detected for some reason.
Recording Beautiful Portraits (Make-up)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Make-up
For details, see the Control Panel procedure on page 48.
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
Continuous AF
When shooting a snapshot while "On" is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen. If "Face Detection" is turned on when you half-press the shutter button,
focusing is performed in the area where a face is detected.
• Shooting with Continuous AF can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
112
Advanced Settings (REC MENU)
Advertisement
Table of Contents
