Casio Exilim EX-FC500S User Manual page 129

NOTE
• Use a HDMI cable that with a plug that is compatible with the camera's HDMI micro
connector on one end, and a plug that is compatible with your TV's HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Disconnect the HDMI cable when you are not using HDMI output. The camera's
monitor screen may not operate normally while the HDMI cable is connected.
. Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * "¥ SETTING" Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
This setting will cause the format to change automatically in accordance
Auto
with the connected TV. Normally, you should use this mode.
1080i 1080i format output*
480p 480p format output
576p 576p format output
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
• If an image does not appear when "Auto" is selected as the output method, try
changing this setting to something else.
IMPORTANT!
• The "HDMI Output" setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the "HDMI Output" setting.
129
Viewing Snapshots and Movies