Connecting To A Tv Viewing Card Slot - Samsung T24D390SW User Manual

Connections
To connect the CI CARD, follow these steps:
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
✎
Turn the TV off to connect or disconnect a CI card.
• If you don't insert the "CI or CI+ CARD", some channels will display the message "Scrambled Signal".
• The pairing information containing a telephone number, the "CI or CI+ CARD" ID the Host ID and other information
will be displayed in about 2~3 minutes. If an error message appears please contact your service provider.
• When the configuration of channel information has finished, the message "Updating Completed" appears indicating
the channel list is updated.
Requirements:
• You must obtain a "CI or CI+ CARD" from a local cable service provider.
• When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
• Insert the "CI or CI+ CARD" in the direction marked on the card.
• The location of the COMMON INTERFACE
• "CI or CI+ CARD" is not supported in some countries and regions; check with your authorised dealer.
• If you have any problems, please contact a service provider.
• Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be distorted or will not be seen.

Connecting to a TV Viewing Card slot

slot may be different depending on the model.
English - 22