Samsung T24D390SW User Manual page 154

Other Information
• Dynamic versus Static IP Addresses
If the network requires a dynamic IP address, use an ADSL modem or router that supports the Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet
mask, gateway and DNS values the TV needs to access the Internet, so they do not have to be entered manually. Most
home networks use a dynamic IP address.
If the network requires a static IP address, enter the IP address, subnet mask, gateway, and DNS values manually when
setting up the network connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet
Service Provider (ISP).
If the network requires a static IP address, use an ADSL modem that supports DHCP. ADSL modems that support
DHCP also allow static IP addresses.
• Ethernet
Ethernet is a LAN (Local Area Network) that uses coaxial cables standardised by the IEEE.
• Component Connection
Component connections are mostly used for game consoles and transmit the video signal by splitting it into a luminance
signal (Y) and two colour signals (Pb and Pr). The connector is marked as [Component IN]_(Pr, Pb, Y) on the back of
the TV. On some devices, it is sometimes marked as Cr, Cb, Y. Cb and Cr are the digital conversions of the Pb and Pr
signals.
The connectors are normally colour-coded red (R), blue (B), and green (G) and offer the best picture quality possible for
an analogue connection.
English - 154