Table of Contents
Advertisement
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)
✎
Turn the TV off to connect or disconnect a CI card.
Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
If you do not insert the "CI or CI+ CARD", some channels will display
•
the message "Scrambled Signal".
•
The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact
your service provider.
•
When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the channel
list is updated.
✎
NOTE
You must obtain a "CI or CI+ CARD" from a local cable service provider.
•
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD"
•
may cause damage to it.
Insert the "CI or CI+ CARD" in the direction marked on the card.
•
The location of the COMMON INTERFACE slot may be different depending on the model.
•
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorised dealer.
•
If you have any problems, please contact a service provider.
•
Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be distorted or will not be
•
seen.
The image may differ depending on the
•
model.
English - 8
Advertisement
Table of Contents
