Schematic Diagram (Main+Standby For Uk& Xe) - Sanyo DCS-AVD8501 Service Manual

SCHEMATIC DIAGRAM (MAIN+ STANDBY)(FOR UK& XE)
PRODUCT SAFETY NOTICE
Each precaution in this manual should
b e f o l l o w e d d u r i n g s e r v i c i n g .
Components identified with the IEC
symbol in the parts list and the
! ! !
schematic diagram designated
components in which safety can be
of special significance. When
replacing a component identified by
! ! ! , use only the replacement parts
designated, or parts with the same
ratings of resistance, wattage or
voltage that are designated in the
parts list in this manual. Leakage-
current or resistance measurements
must be made to determine that
exposed parts are acceptably
insulated from the supply circuit
before returning the product to the
customer.
This is a basic schematic diagram.
- 94 - - 95 -