Sanyo DCS-AVD8501 Service Manual page 66

SCHEMATIC DIAGRAM (MAIN+ STANDBY)(FOR US& CA)
PRODUCT SAFETY NOTICE
Each precaution in this manual should
b e f o l l o w e d d u r i n g s e r v i c i n g .
Components identified with the IEC
symbol in the parts list and the
! ! !
schematic diagram designated
components in which safety can be
of special significance. When
replacing a component identified by
, use only the replacement parts
! ! !
designated, or parts with the same
ratings of resistance, wattage or
voltage that are designated in the
parts list in this manual. Leakage-
current or resistance measurements
must be made to determine that
exposed parts are acceptably
insulated from the supply circuit
before returning the product to the
customer.
This is a basic schematic diagram. - 86 - - 87 -