Power Button Board - HP Pavilion x360 Maintenance And Service Manual

3. Remove the speakers (3).
Reverse this procedure to install the speakers.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the power button board:
1. Release the ZIF connector (1) to which the power button board cable is attached, and then disconnect
the power button board cable from the system board.
2. Remove the Phillips PM2.4×3.7 screw (2) that secures the power button board to the bottom cover.
Keyboard/top cover on page
Battery on page 30).
Spare part number
768009-001
26).
Power button board 37