Lower Self-Clean Latch - Viking veso165 Service Book

Illustration 1

LOWER SELF-CLEAN LATCH

The oven will have to be removed from the
wall to service the lower self-clean latch and
the components located on the latch
mechanism.
Remove the oven doors to lighten the load.
Remove the side trim pieces "B" by removing
the top and lower screws marked "A" and
the screws along the side marked "D" on
(Ill. #1).
Remove the center trim "F" (Ill. #2).
Remove the brackets "C", one on each side of
the oven.
Tilt the upper oven back, hinging on the rear
screws "E" (Ill #3).
VEDO265
52
Illustration 2
ILLUSTRATION 3