Hobby 2015 Vantana Manual page 94

Charger CA-360, 25 A power charging module
The charger supplies the batteries with electric power when
there is bus-powered mains operation.
As they heat up, the charger reduces its power output to
ensure that there is no chance of overheating.
The charging device can be accessed from the back of
the passenger seat.
1 2 3
j
Socket; the middle pin is the sensor.
k
PCB switches. The switches must all be in the top posi-
tion, i.e. all set to "off".
l
Changeover contact, for free disposal.
m
Contact bridge, fan on/off.
n LED blinks to show current charging mode.
Electrical Installations
07-26
4 5