Hobby 2015 Vantana Manual page 77

07-9
Electrical Installations
• You can now increase or decrease the temperature shown
by up to +/-7°C in steps of 1°C. When the desired value
has been set, quit the menu item by pressing briefly on the
selector switch.
• Quit the calibration menu by using the selector switch to
select the Return icon. The changed value is now shown
on the temperature display.
Battery charging
After the type and capacity of the battery have been set and it
has been calibrated, the battery sensor permanently monitors
the status of the batteries (starter/ancillary battery).
The intelligent battery sensor is connected directly to the nega-
tive terminal on the ancillary battery.
Battery charging function
230V voltage applied and charger has been activated for
sensor control.
The fan can be switched on and off in this menu; the illustration
shows the fan when it is switched on.