Gigaset SL37H User Manual page 15

First steps
Delete Entry
Delete selected entry.
VIP Entry (directory only)
Mark a directory entry as a VIP (Very
Important Person) and assign a specific
ringer tone to it. You can then recognise
important calls from the ringer tone.
Precondition: Calling Line Identification.
Copy Entry
Send a single entry to a handset
¢
( page 14).
Delete List
Delete all entries in the directory/call-by-
call list.
Copy List
Send complete list to a handset
¢
( page 14).
Available Memory
Display the available entries in the
directory and call-by-call list
¢
( page 12).
Using quick dial keys
¤
Press and hold the required quick dial key
¢
( page 18).
Sending the directory/call-by-call
list to another handset
Preconditions:
u
The sending and receiving handsets
must both be registered on the same
base station.
u
The other handset and the base station
can send and receive directory entries.
¢
s / C s (select entry)
¢
§Options§
(open menu)
¢
Copy List to Internal
~
Select the internal number of
the receiving handset and press
§OK§
.
You can send several single entries one after
the other, by responding to the prompt
Copy next entry? with
14
¢
Copy Entry /
§Yes§
.
A successful transfer is confirmed by a mes-
sage and confirmation tone on the receiving
handset.
Please note:
You can also send the complete directory via
data transfer, without opening the directory:
¢ ¢
w í
Data Transfer
¢
Directory
Please note:
u
Entries with identical numbers are not
overwritten on the receiving handset.
u
The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
Transferring the directory as a
vCard with Bluetooth
¢
In Bluetooth mode (
transfer directory entries in vCard format,
e.g. to exchange entries with your mobile
phone.
¢
s s (select entry)
¢
menu) Copy Entry /
¢
Copy List vCard via Bluetooth
The list of "Known Devices" (
displayed.
s
Select device and press
Receiving a vCard with Bluetooth
If a device from the "Known Devices" list
¢
( page 27) sends a vCard to your handset,
this occurs automatically and you are
informed about it via the display.
If the sending device does not appear in the
list, you will be asked on the display to enter
the device PIN for the sending device:
~
Enter the PIN for the sending
Bluetooth device and press
The transferred vCard is available as a direc-
tory entry.
page 26) you can
¢
§Options§
(open
¢
page 27) is
§OK§
.
§OK§
.