CADDX Ranger 8600E Installation Manual page 12

NOTE: WHEN PROGRAMMING THE FOLLOWING COMMUNICATOR CODES,
A "10" MUST BE PROGRAMMED IN ORDER TO REPORT A ZERO (0).
LOCATION 086-087: PROGRAMMING THE RANGER 8600E FOR DURESS CODE CAPABILITY
The Ranger 8600E has the ability to report a duress code when the system is armed or disarmed with user code
number 7 and a duress communicator code is programmed in locations 086-087. If both locations are "0", the duress
capability is disabled and user code number 7 can only be used as a standard arm/disarm code. Location 086 contains
the standard digit, and location 087 contains the extended digit. When using 4+2 format, the number programmed in
location 086 is sent as the "ones" digit. The "tens" digit is programmed in location 087. NOTE: ENABLING THE
MAINTENANCE CODE FEATURE IN LOCATION 167 WILL AUTOMATICALLY DISABLE THE DURESS FEATURE.
LOCATION 088-089: PROGRAMMING FOR AUXILIARY 1, [1] & [3] DOUBLE KEYPRESS
The Ranger 8600E has the ability to report an Auxiliary 1 code and activate the Priority siren each time the [1] and [3]
keys are pressed simultaneously on the keypad. The desired reporting code is programmed in locations 088-089. If both
locations are "0", the Auxiliary 1 double keypress is disabled. Location 088 contains the standard digit, and location 089
contains the extended digit. When using a 4+2 format, the number programmed in location 088 is sent as the "ones"
digit. The "tens" digit is programmed in location 089. If activated, entering any arm/disarm code can silence the siren.
LOCATION 090-091: PROGRAMMING FOR AUXILIARY 2, [4] & [6] DOUBLE KEYPRESS
The Ranger 8600E has the ability to report an Auxiliary 2 code and activate the pulsing buzzer each time the [4] and [6]
keys are pressed simultaneously on the keypad. The desired Auxiliary 2 code is programmed in locations 090-091. If
both locations are "0", the Auxiliary 2 double keypress is disabled. Location 090 contains the standard digit, and location
091 contains the extended digit. When using 4+2 format, the number programmed in location 090 is sent as the "ones"
digit. The "tens" digit is programmed in location 091. If activated, entering any Arm/Disarm code can silence the keypad
sounder.
LOCATION 092-093: PROGRAMMING FOR KEYPAD PANIC, [U] & [#] DOUBLE KEYPRESS
The Ranger 8600E has the ability to report a Keypad panic code and activate the Burg siren each time the [U] and [#]
keys are pressed simultaneously on the keypad. The desired Keypad panic code is programmed in locations 092-093. If
both locations are "0", the Keypad panic double keypress is disabled. Location 092 contains the standard digit, and
location 093 contains the extended digit. When using 4+2 format, the number programmed in location 092 is sent as the
"ones" digit. The "tens" digit is programmed in location 093. If activated, entering any Arm/Disarm code can silence the
siren.
LOCATION 094-095: PROGRAMMING THE TAMPER FEATURE
The Ranger 8600E has an optional tamper feature that, when enabled, will lock out the keypads for 1 minute if 30
random keypresses are made without producing a valid code. The desired tamper code should be programmed in
locations 094-095. If the control is not programmed for local only, the tamper will be communicated. If both locations are
"0", the tamper feature will not be enabled or reported. Location 094 contains the standard digit, and location 095
contains the extended digit. When using 4+2 format, the number programmed in location 094 is sent as the "ones" digit.
The "tens" digit is programmed in location 095.
LOCATION 096-097: PROGRAMMING TO REPORT DOWNLOADING COMPLETE
Locations 096-097 contain the communicator report that is sent each time a download session has been completed.
The report will come in after a disconnect has been made from a downloading session. Location 096 contains the
standard communicator code, and location 097 contains the extended communicator code. When using a 4+2 format,
the number programmed in location 096 is sent as the "ones" digit. The number programmed in location 097 is sent as
the "tens" digit. When using an extended format, the extended report will be sent if location 097 contains a number other
than "0". If locations 096-097 are "0", this report is disabled.
LOCATION 098-099: PROGRAMMING FOR AUTOTEST REPORTS
The Ranger 8600E has the ability to send autotest reports at intervals from 1 to 15 days. Locations 098-099 contain the
communicator codes sent for autotest. Location 098 contains the standard communicator code, and location 099
contains the extended communicator code. When using a 4+2 format, the number programmed in location 098 is sent
as the "ones" digit. The number programmed in location 099 is sent as the "tens" digit. When using an extended format,
the extended report will be sent if location 099 contains a number other than "0". If locations 098-099 are "0", autotest is
disabled. (NOTE: WHEN USING AUTOTEST, LOCATIONS 152-166 MUST BE PROGRAMMED.)
12