Table of Contents
Advertisement
11. After the applications have been installed, the following
message appears.
Click OK and restart your computer. Then turn on the Stylus
Scan by pressing the P power button.
12. Plug the appropriate end of the cable into the USB port on the
back of the Stylus Scan. (The end that attaches to the Stylus
Scan has a different shape from the end that attaches to the
computer.)
Note:
To connect the Stylus Scan to a USB port, you need a standard
shielded USB cable.
13. Connect the other end of the cable to the computer's USB port.
Note:
If you have more than one USB hub connected to your computer,
connect the Stylus Scan to the hub that is connected directly to your
computer. If the EPSON Stylus Scan does not work properly when
connected to the hub, connect it directly to the computer's USB port.
13
Advertisement
Table of Contents
