Table of Contents
Advertisement
1. Make sure the Stylus Scan is off, and that it is not connected
to your computer. Then turn on the computer and start
Windows 98.
Note:
If you turn on the EPSON Stylus Scan before turning on your
computer, the computer may detect the Stylus Scan and display the
New Hardware Found dialog box, or a similar wizard, following
start-up. If this occurs, click the Cancel button to close the dialog
box and remove the USB cable. Then continue with installation as
described below.
2. Insert the EPSON Stylus Scan 2000 Software for Windows
CD-ROM in the CD-ROM drive. The Select Language dialog
box appears.
3. Select the language you want and click OK.
10
Advertisement
Table of Contents
