Front Wheel Stand - BMW R1200RT Rider's Manual

Install washer 2 and screw 3.
7
Muffler on footpeg
bracket
130
14 lb/ft (19 Nm)
z
Slide clamp 1 as far forward
as possible and position it with
notch in nose (arrow).
Tighten clamp.
Clamp on muffler and
exhaust manifold
16 lb/ft (22 Nm)
Lay on muffler cover 3.
Install screws 1 at front with
washer 2.

Front wheel stand

Mounting front wheel
stand
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
wheel stand and the rear wheel
alone can fall over.
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Make sure ground is level and
firm and place motorcycle on
center stand.
Use basic stand with front
wheel mount. The basic stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.
Loosen mounting screw 1.
Push the two mounts 2 out-
ward, continuing until the front
supension fits between them.