General Instructions; Onboard Tool Kit - BMW R1200RT Rider's Manual

General instructions

7
The "Maintenance" chapter de-
scribes work involving the check-
114
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Further information about main-
z
tenance and repair work can be
obtained on DVD through your
authorized BMW Motorrad re-
tailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work.
If you are in doubt, consult an
authorized workshop, preferably
your authorized BMW Motorrad
retailer.

Onboard tool kit

Standard tool kit
1 Screwdriver handle
2 Reversible screwdriver in-
sert
Phillips PH1 and Torx T25
Removing rider's seat
( 84).
Removing and installing
body panels.
3 Tool for oil cap
Topping up engine oil
( 116).
Remove passenger seat
( 85).
Install the passenger seat
( 86).
4 Open-ended wrench
Wrench size: 8/10 mm
Service tool kit
For more extensive service op-
erations (such as wheel removal
and installation), BMW Motorrad
has put together a service tool kit
matched to your motorcycle. You