BMW R1200RT Rider's Manual page 137

Connect electrical connector 1.
Locate speaker unit 2 in
mount.
Install screws 1.
Place speaker cover 1 in posi-
tion and fit screws 2.
Replacing bulb for parking
light
The description below
steps you through the
procedure for replacing the left
bulb. Replacement is carried out
in the same way on the right
side.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screws 2.
Remove speaker cover 1 side-
ways to the left.
Remove screws 1.
Carefully remove speaker
unit 2, paying attention to the
electrical connector.
7
135
z