JUKI AMS-210E Series Engineer's Manual page 73

Upper 3 figures indicate a
memory switch number.
Lower 2 figures indicate
setting contents.
2. For CP-20:
1. Press the
activate the user setting mode (Level 1)of the memory
switch.
Hold down the
service setting mode (Level 2) of the memory switch.
(Caution) A 3-second and a 6-second buzzers
sound when the key is held down. The
3-second buzzer informs users of ac-
tivation of the test mode.
2. Change the memory switch number with the
keys.
3. Press the
to be changed appears. On this occasion, the sew-
ing LED is turned on.
4. Change the contents of the memory switch with the
and
5. The factory settings can be restored with the
6. Press the
sewing LED is turned off and the screen returns to
the one where the memory switch number is selected.
7. Press the
mode and to return to the regular mode.
– 68 –
key when the sewing LED is off to
key for 6 seconds to activate the
key when the memory switch number
keys.
key to register the changes. The
key to end the memory switch setting
and
key.