JUKI AMS-210E Series Engineer's Manual page 138

6. Use of smart media other than those packed together
When the contents of the smart media card packed together are going to be copied on another smart media card,
the smart media card of the copying destination should be formatted with IP400. Since then, the following directory
configuration should be established with a personal computer.
Information about the method of smart media card formatting is obtainable from the Instruction Manual, [2-25. How
to Use the Communication Functions].
Route directory
[ ] = Folder
xxxxxx = RVL code (6 digits)
[PROG] [AMS210E]
– 133 –
MTxxxxxx.prg (Servo program)
MAxxxxxx.prg (Main program)
[IPxxxxxx] (IP-400 program)
IPxxxxxx.hed
IPxxxxxx.p01
IMxxxxxx.i01
IMxxxxxx.i10
IMxxxxxx.i11
IMxxxxxx.i12
IMxxxxxx.i13
IMxxxxxx.i21
IMxxxxxx.i22
IMxxxxxx.i23
NPxxxxxx.prg (CP-20 program)