Pioneer VSX-1131 Basic Manual page 55

> Specifications > Settings
Setting Item Default Value
Height Left 0 dB
Height Right 0 dB
Surround Right 0 dB
Surr Back Right 0 dB
> Listening Modes > Playback Function
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Setting Item Default Value
Surr Back Left 0 dB
/ , adjust
Surround Left 0 dB
/ , adjust
Subwoofer 0 dB
/ , adjust
• The result may not be as expected depending on the input source and listening mode setting.
• If you want to make the adjustments while listening to something, press
and select the Preset you want to adjust in AV Adjust - MCACC - Manual EQ Select first.
/ , adjust
> Basic Manual
Troubleshooting | Appendix
Setting Details
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with / .
• This cannot be selected if "No" is set in
"System Setup" - "Speaker" - "Configuration" -
"Subwoofer".
on the remote controller,
/ , adjust
/ , adjust
/ , adjust
23 23