Pioneer VSX-1131 Basic Manual page 48

> Specifications > Settings
Setting Item Default Value
Fixed PCM Off
• The setting cannot be changed when "TUNER", "NET", "USB", or "BT AUDIO" input is selected.
16 16
> Listening Modes > Playback Function
Setting Details
Select whether to fix input signals to PCM (except
multi-channel PCM) when you have selected
"HDMI", "COAXIAL", or "OPTICAL" in the "Audio
Select" setting. Set this item to "On" if noise is
produced or truncation occurs at the beginning of
a track when playing PCM sources. Select "Off"
normally.
• Changing "Audio Select" changes the setting to "Off".
Hardware
Make settings related to the HDMI CEC, HDMI Standby Through, ARC features, settings
related to power management of the unit, such as Auto Standby and Network Standby.
■ HDMI
Setting Item Default Value
HDMI CEC Off
> Basic Manual
Troubleshooting | Appendix
Setting Details
Setting to "On" enables the input selection link and
other link functions with HDMI connected CEC
compliant device.
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on
again the power of all connected components.
• Depending on the TV set, a link may need to be
configured on the TV.
• This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
• Setting to "On" and closing the on-screen menu
displays the name of the CEC-compatible
components and "CEC On" on the display.
• Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
• If you operate the MASTER VOLUME dial on
the main unit when this setting is "On" and
audio is output from the TV speakers, audio will
be output also from the speakers connected to
the unit. If you want to output from only either of
them, change the unit or TV settings, or reduce
the volume of the unit.
• If abnormal operation occurs when you set the
setting to "On", set it to "Off".
• When connecting a non-CEC compatible
component, or when you are not sure whether it
is compatible, set the setting to "Off".