Pioneer VSX-1131 Basic Manual page 43

> Specifications > Settings
Setting Item Default Value
Double Bass Off
> Listening Modes > Playback Function
Setting Details
This can be selected only when "System Setup" -
"Speaker" - "Configuration" - "Subwoofer" is set to
"Yes" and "Front" is set to "Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
• The setting will not automatically be configured
even if you performed Full Auto MCACC.
■ Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value
Front Left 10.0ft/3.00m
Center 10.0ft/3.00m
Front Right 10.0ft/3.00m
Height Left 10.0ft/3.00m
Height Right 10.0ft/3.00m
Surround Right 10.0ft/3.00m
Surr Back Right 10.0ft/3.00m
Surr Back Left 10.0ft/3.00m
Surround Left 10.0ft/3.00m
Subwoofer 10.0ft/3.00m
• Default values vary depending on the regions.
> Basic Manual
Troubleshooting | Appendix
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• This setting cannot be changed if "System
Setup" - "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2".
Specify the distance between each speaker and
the listening position.
• This setting cannot be changed if "System
Setup" - "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2".
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
11 11