Pioneer VSX-1131 Basic Manual page 17

> Before start > Hookup
BD/DVD
1 Analog audio cable, 2 Speaker cable
> Setup > Playback > Part Names
1
ZONE2 LINE OUT
MAIN ROOM
ZONE2
2
LINE
IN
ZONE SPEAKER
> Advanced Manual
Troubleshooting | Appendix
Multi-zone Connection
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the
separate room (ZONE 2).
0 DSD and Dolby TrueHD audio signals are not output to
ZONE 2 when selected with the "NET" input selector.
Connections with an AV component
When outputting the audio of an external AV component
to ZONE 2, you need to connect using an analog audio
cable.
ZONE 2 LINE OUT
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
the ZONE 2 LINE OUT jacks of the unit and the LINE IN
jacks of the pre-main amplifier in a separate room with an
analog audio cable.
ZONE SPEAKER
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 You can play through a maximum of 5.1 channels in the
main room during ZONE 2 playback. Listening modes
such as the Dolby Atmos modes cannot be selected.
0 There is no output from Speakers B if Zone Speaker
connection is used.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" ( P20) to enjoy this feature.

17