Removing And Installing The Panel; Checking The Spark Plug - Yamaha Tricity MW125A Owner's Manual

Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
1
1. Panel A
Panel A
To remove the panel
1. Open the seat. (See page 3-14.)
2. Remove the screws, and then pull
the panel off as shown.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18752
2
1. Panel A
2. Screw
To install the panel
1. Place the panel in the original po-
sition, and then install the screws.
EAU56941
2. Close the seat.
http://www.motorcycle.in.th

Checking the spark plug

The spark plug is an important engine
2
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
1
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.
To remove the spark plug
1. Remove panel A. (See page 6-8.)
2. Remove the spark plug cap.
1. Spark plug cap
3. Remove the spark plug as shown,
6-8
1
with a spark plug wrench available
at a Yamaha dealer.
EAUT2074
6