Connecting The Antennas (Aerials); Connecting Another Amplifier In Zone - Sony STR-ZA3000ES User Manual

Hint
The image quality depends on the connecting jack. We recommend that you connect your
devices via an HDMI connection if they have HDMI jacks.
[17] Preparation

Connecting the antennas (aerials)

Connect the supplied antennas (aerials) to the receiver as illustrated below.
Be sure to disconnect the AC power cord (mains lead) before connecting the antennas
(aerials).
AM loop antenna (aerial) (supplied)
FM wire antenna (aerial) (supplied) (*)
*
The illustration above is for USA and Canadian models.
Note
To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and
other devices.
Be sure to fully extend the FM wire antenna (aerial).
After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
[18] Preparation

Connecting another amplifier in zone 2/3

You can enjoy image (*) and sound from a device connected to the receiver in a zone other
than the main zone. For example, you can watch a DVD in the main zone and listen to a CD
in zone 2.
*
For a connection using the HDMI OUT B jack only
Connecting another amplifier using the ZONE 2 VIDEO/AUDIO
Connecting audio-visual devices and the antennas (aerials)
Connecting audio-visual devices and the antennas (aerials)