Sony STR-ZA3000ES User Manual page 94

[99] Adjusting Settings
Presetting the volume in the main zone (Main Preset
Volume)
Set the volume to be used when the receiver is turned on.
1. Select [Setup] - [Zone Setup] from the home menu.
2. Select [Main Preset Volume].
3. Adjust the volume.
[100] Adjusting Settings
Turning on/off the power for zone 2/3 (Power)
You can turn on or off the power for zone 2 or zone 3 by the following procedure.
1. Press ZONE2 or ZONE3 on the remote control or on the receiver.
Note
The receiver in zone 2 or zone 3 remains turned on even when this receiver is in standby
mode (To turn off the amplifier power for zone 2 or zone 3, press ZONE2 or ZONE3 on
the remote control or on the receiver.).
When the receiver is in standby mode, the
lights up in amber if the receiver in zone 2 or zone 3 is turned on.
The top of the cabinet may become hot. This is because part of the circuit(s) inside the
receiver is(are) still turned on, and is not a malfunction.
Hint
You can also turn on or off the power for zone 2 or zone 3 by setting [Zone2 Power] or
[Zone3 Power] in [Zone Setup] from the home menu.
[101] Adjusting Settings
Selecting the source signals for zone 2/3 (Input)
Zone Setup
Zone Setup
Zone Setup
(on/standby) indicator on the front panel