Default Settings - Moultrie GAMESPY DIGITAL CAMERA M80 Instructions Manual

Slide the UNLOCK switch on the bottom of Camera and use the knob to pull
the slide-out Battery Tray. Install four(4) or eight(8) AA size alkaline or
lithium batteries with polarities as indicated in the Battery Tray. Re-install the
Battery Tray.
Thread the provided Mounting Strap through the Eyelets on the back of the
camera and secure to a tree or pole approximately 36" from the ground as
shown.
Turn Camera on by sliding ON/OFF/AIM switch to
the ON position.
Press the MODE button one time to get to the
Camera Setup Menu. Set Time and Date by pressing
ENTER, using UP/DOWN to adjust selected field,
LEFT/RIGHT to move to the next field and ENTER
when done.
Press MODE button until MENU SELECTION
screen is displayed. Use the UP/DOWN buttons
until the MAIN SCREEN option is highlighted
yellow. Press ENTER.
Your Camera will now automatically take pictures
whenever an animal is detected in range -based on
the default settings below.
Capture Mode
Photo Quality
Photo Delay after each photo is taken
Multi Shot Count
Digital Zoom
Video Resolution
Video Length
Video Audio
Camera Name
Temperature
Info Strip printed on photos
Plot Frequency
Plot Duration
Default Setting
Delete All?
M80 GameSpy Digital Camera
Eyelet
Mounting
Strap
TRAIL CAM (Still)
HIGH
1 MIN
1-SHOT
NO ZOOM
HIGH
5 SEC
ON
MYCAMERA
Fahrenheit
ON
15 SECONDS
3 HOUR
NO
NO
Page 3