Activity Search - Moultrie GAMESPY DIGITAL CAMERA M80 Instructions Manual

B
PLOTSTALKER ACTIVITY SEARCH

ACTIVITY SEARCH

The Search Feature will scan through your photos and automatically
look for changes in regions that you identify in Setup.
In search mode, the PlotStalker software scans through the .mlt photo file, stops
on a photo when changes are found in your identified region, and then highlights
the changes in blue. You can click anywhere in the video viewing area to remove
the blue highlights.
ACTIVITY SEARCH SETUP
Click the Settings button to activate
the Region and Sensitivity settings
for the Activity Search
DEFINE SEARCH REGION
Provides the ability to search for
changes in the photo in a specific
region rather than the entire photo.
Click on the Set Motion Search Area Button.
1
Use the mouse to select and drag the red outline around the area you want to
2
search for movement. This allows you to focus on a very precise area if
required.
Click OK button on the Settings Popup window to confirm your settings and
3
exit the menu.
SENSITIVITY
Set to High, Medium or Low - This sets the level of pixel change the program
1
will detect. Note; a pixel change will occur with a color, intensity, lighting or
movement so this setting is critical to obtain the desired results.
DEFAULT SETTINGS
Click on Default button to return to the default values for Search Area and
1
Sensitivity settings
Page 14
PlotStalker Software