GREAT PLANES J-3 Cub Instruction Manual page 15

and improved aerodynamics. Unlike most electrics, the
Reactor 3D ARF was designed for in-runner or out-runner
motors and includes mounts for both. GPMA1540
ElectriFly Yard Stik ™ ARF
No need to worry about the weather – with a Yard Stik,
anytime is flying time! It flies equally well in a park, a field or
a large, wide-open building, and flies at the pace of a brisk
walk. Assembly is quick (less than an hour) and easy. The
included 280 motor, prop and 3.5:1 gearbox simply slide into
place on the boom fuselage. The wing halves and tail are
balsa, prebuilt and factory-covered in a film that contrasts
black and white Maltese Crosses against a transparent red
background. The boom and the wing's leading and trailing
edges are made of a carbon-fiber composite for strength,
rigidity and weight savings. Nylon in the wheels and pod add
to ease and style, but virtually nothing to the Yard Stik's 11
to 12 oz. all-up weight. GPMA1100
ElectriFly C-7 Nano Brushed ESC
The compact, easy-to-use C-7 Nano ESC is LiPo/NiCd/NiMH
compatible and offers BEC, fully proportional forward, factory-
installed connectors, "Safe Start" system and low voltage cut-off,
plus audible tones for easy set-up. GPMM2005
Futaba ® 4YF SkySport FM Radio
With its two 0.27 oz [7.7g] S3110 micro servos, the 4YF FM
is an ideal system for the FlatOuts J-3 Cub. In addition to
servo reversing and trims, the 4YF also includes an R114F
single-conversion receiver, charger, battery LEDs, and
sticks with length and tension adjustments. One additional
S3110 servo will be required. FUTJ37**
ElectriFly PolyCharge4
For convenience with multiple LiPo packs, there's the DC
PolyCharge4. Each of its four independent outputs can
charge a one-to-four cell Lithium-Polymer pack. It's ideal if
you don't have the time for one-at-a-time charging – and
don't want the expense and hassle of multiple chargers.
Each output can handle packs from 300 to 3000mAh. Set
the capacity, and PolyCharge4 will automatically set the
charge rate to get you started – and use light and sound
cues to tell you when your pack is done. GPMM3015
ElectriFly Triton ™ 2 DC Computerized Peak Charger,
Discharger & Cycler
Like the popular original Triton charger, the Triton2 offers easy
programming. But the adjustable charge current has been
increased from 5.0A maximum to 7.0A, and the Triton2 can
handle LiPo packs with up to 5 cells in series. A cool blue
backlight on the 2 x 16 LCD screen makes for easier reading
in any conditions, and the rotating dial has been raised for
enhanced feel and more precise fingertip control. The Triton2
is more versatile too: you get alligator clips that mate onto the
banana plugs, for quick connection to 12V batteries or power
supplies. You'll still be able to charge 1 to 4 cell lithium-ion and
lithium-polymer batteries, and peak 1 to 24 cell NiCd and
NiMH packs at rates you set to peak detection values you
choose – before discharging them at custom rates and then
repeating the cycle up to 10 times. GPMM3153
15
™