Onscreen Displays And Data Code - Canon VIXIA HF G40 Instruction Manual

Onscreen Displays and Data Code

You can turn most onscreen displays on or off.
Operating modes:
Repeatedly press D to turn the onscreen displays on/off in the following sequence:
mode:
• All displays on
1
• Onscreen markers
• Displays off
2
mode :
• Only data code on
• All displays on
1
The onscreen markers will be displayed only when p
[Onscreen Markers] is set to an option other than [j Off].
2
Pressing D has the same effect as touching the screen. During single photo view and while playing
back a scene, the playback controls are displayed only momentarily.
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the s /
Onscreen Displays and Data Code
>
>
[Data Code] setting.
89