Onscreen Displays And Data Code - Canon VIXIA HF G20 Instruction Manual

Onscreen Displays and Data Code

Onscreen Displays and Data Code
You can turn most onscreen displays on or off.
Operating modes:
Repeatedly press D to turn the onscreen displays on/off in the following sequence:
82
, mode:
• All displays on
• Most displays off
, mode
• Only data code on
• All displays on
1
Pressing D will turn off most of the icons and displays that
appear automatically but will not remove control buttons ([FUNC.],
[PHOTO], etc.) and onscreen displays that were turned on manually
(for example, onscreen markers or the audio level meter).
2
In these modes, pressing D has the same effect as touching
the screen. During single photo view and while playing back a scene, the playback controls are
displayed only momentarily.
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the s /
1
2
:
>
[Data Code] setting.