Onscreen Displays And Data Code - Canon Legria HFM31 Instruction Manual

Onscreen Displays and Data Code

You can turn most onscreen displays on or off.
Operating modes:
Repeatedly press h to turn the onscreen displays on/off in the
following sequence:
, mode:
• All displays on
• Most displays off
2
mode :
• All displays on
• Only data code on
• All displays off
1
Pressing h will turn off most of the icons and displays that appear automati-
cally but will not remove onscreen displays that were turned on manually (for
example, onscreen markers or the audio level meter).
2
Touch the screen to display the playback controls.
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code
(date/time of recording, information about the camera setup, etc.). In
mode, this information is displayed within the Exif information
panel while the playback controls are displayed on the screen; in
mode, you can select the information to be displayed with the y
8
[Data Code] setting.
90
Video
1
2
mode :
• All displays on
• Only recording date
and time on
• All displays off