Canon VIXIA HF G40 Instruction Manual page 150

Appendix: Menu Options Lists
[Auto Power Off]:
In order to save power when the camcorder is powered by a battery pack, it will
automatically shut off if left without any operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.
[Battery Info]:
When you are using a battery pack that is compatible with Intelligent System, this option
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time ( mode) or playback time ( mode).
• If the battery pack is exhausted, the battery information may not be displayed.
150
[HDMI Time Code]:
When set to [i On], the HDMI signal output from the camcorder includes the
camcorder's time code.
[HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMI
OUT terminal.
[Output Onscreen Displays]:
When set to [i On], the camcorder's onscreen displays will appear also
on the screen of a TV or monitor connected to the camcorder.
[Distance Units]:
Selects the units to use for the focusing distance display while focusing manually. This
setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.
[GPS Auto Time Setting]
: When the optional GP-E2 GPS Receiver is attached to the camcorder, you
can have the camcorder automatically set the time based on the information acquired from GPS. For
more details, refer to Setting Time from GPS on the Camera in the receiver's instruction manual.
[GPS Information Display]
: When the optional GP-E2 GPS Receiver is attached to the camcorder, this
function allows you to view GPS information. For more details, refer to Viewing GPS Information in the
receiver's instruction manual.
[MAC Address]
: Displays the camcorder's MAC address.
[Certification Logo Display]:
This displays select certification logos that apply to this camcorder.
• This setting may not be available depending on the country/region of purchase.
[Demo Mode]:
The demonstration mode displays the camcorder's main features. It starts automatically
when the camcorder is powered with the compact power adapter if you leave it turned on without a
memory card for more than 5 minutes.
• To cancel the demo mode once it has started, press any button or turn off the camcorder.
[Firmware]:
You can verify the current version of the camcorder's firmware. This menu option is usually
unavailable.
[Reset All]:
Resets all of the camcorder's settings.