Installing A Paper Roll - Exadigm NX1200 User Manual

5.0

Installing a Paper Roll

A paper roll is required to print receipts and reports. The NX1200 uses thermal 2 ¼ x 80' paper rolls
(standard size).
Follow the steps below to install a paper roll:
1. Place forefinger under flap at the top of the terminal and pull forward using force.
2. Using the tab lift compartment up.
3. Place the paper roll in the printer compartment.
4. Close the printer compartment door by pressing until it clicks into place.
© 2014 ExaDigm, Inc. Page 5 of 16
NX1200 User Guide
Rev. 1/0614