Table of Contents
Advertisement
MS30BT
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from
other Bluetooth device.
1.
Press the source button repeatedly enter to Bluetooth mode, the LED will flare
between red and blue color continuously, which means the unit is ready to pair.
2.
Enable the Bluetooth function and scan on your Bluetooth device (please reference
the device manual for operation), and check the available Bluetooth device on the
list.
3.
Select " BP MS30BT" for pairing.
4.
A short notice sound will come out from the speaker after the Bluetooth pairing
successfully. Also, only the blue color LED will flare.
5.
Select and play the music from your Bluetooth device, then the music come out from
the micro system.
6.
Press the previous/next button can select last and next track during playing.
7.
In Bluetooth mode, you can achieve play/pause, mute, EQ, loudness, treble and bass
adjustment etc. function. Please reference the operation from the general operation
part on this manual.
Notices:
a.
All Bluetooth devices are not guaranteed for pairing successfully due to different
design and brand.
b.
The best working distance of Bluetooth is within 10 meters without any obstacle in
between.
c.
The unit only can pair and work with one Bluetooth device in one time.
d.
Please quit the current Bluetooth pairing before pair with other device, otherwise
the " BP MS30BT" will not show on the device list.
Line in/AUX IN/MP3 link operation
In order to wire playback the music from other player or source, please follow up below
operation.
1.
Using the supplied audio cable( 3.5mm to 3.5mm stereo connector) connect the AUX
IN jack(3.5mm stereo type) on front panel of main unit, and the another 3.5mm
stereo connector connect with line-out jack of outsourcing player.
2.
Select the music and play, then the sound will output from the micro system.
3.
In line-in playback mode, the main control is on the outsourcing player side. But you
also can control the volume, and mute the sound on the micro system side.
Audio out and headphone
1.
Audio out: Using the RCA to 3.5mm stereo type audio cable(not include) connect
with the audio out jack(RCA type) on the rear panel of the main unit, and another
3.5mm stereo connector connect with AUX IN jack on other speaker device. Then the
sound will output both on the micro system and other outsourcing speaker device.
Please kindly note the main control is on the micro system side during audio out
playback.
2. Headphone: plug the headphone connector into the headphone jack on front panel,
then the sound will silence in micro system, but output from the headphone. Adjust
volume setting on micro system or headphone to get the comfortable sound level
for listening.
13
Hide quick links:
Advertisement
Table of Contents
