Table of Contents
Advertisement
MS30BT
3.
Please check if the power source is correspond to the rating voltage spec which locates on
the back panel of main unit. If it does not matching, please consult to your dealer or
service center.
4.
Insert the attached AC power plug into the wall outlet in order to get the power. The front
panel power LED will light on in red color when the power is ready.
Remote control battery installation
Open up the battery door and insert 2 x AAA battery into the compartment; please
make sure the polarity of battery will aim and correspond to the positive and
negative engraved symbol in the compartment. Then close the battery door.
Notes:
a.
The best working distance of remote control is within 7 meters without any obstacle in
between. Please aim to the remote control sensor locates on the left corner of display
during operation.
b.
The sensitivity of remote control will become weak when the battery power exhausted.
Please replace it with fresh one for operation.
c.
Please take out the battery in case of none-operation in a long time.
d.
Please dispose the battery in a environment friendly way. Please reference the local
government requirement for the detail.
General operation
1.
Power on/off and standby: The red color power LED will light on when you connect it
with AC power successfully; please remove the AC plug for complete power off. Press the
power button on front panel or remote control for standby on and off switching.
2.
Mute: press the MUTE button on remote control to silence the sound output; press it
again to resume the playing. You can also resume the playing by press the volume +/-
button.
3.
Source, CD/USB: press the SOURCE button repeatedly to switch the play mode between
CD - FM radio - Line in - Bluetooth. You also can enter to the Bluetooth mode directly by
press the BT button from remote control. The USB playback mode is only available when
the USB stick has plugged into the USB port, press the CD/USB button enter to USB mode;
or in CD mode, the unit will play the USB automatically after few seconds if there is no CD
loaded inside.
4.
Volume adjustment: press the VOL+/- button to increase or decrease the output volume.
5.
Treble & bass adjustment: press the TREBLE +/- and BASS +/- for the treble and bass
adjustment.
10
Hide quick links:
Advertisement
Table of Contents
