Blaupunkt MS30BT Owner's Manual page 13

MS30BT
1. Sound equalizer: press the EQ button to switch the playing equalizer mode
between ROCK-Classic-POP-Jazz-EQ off.
2. Loudness: press the " LOUDNESS" button to enhance the bass level.
3. Selection by digits button
Fast select the relative track in CD and USB playback mode after key-in the
relative digits number from remote control;
Fast pick up the preset FM station in FM radio mode;
4. 10 + button: Press 10 + button can get fast selection. For example, you want to
select the number 25 track, you can press the 10+ button twice, and then press 5
( function only available for CD format disc and FM preset station picking up).
5. Play,pause and stop:In CD/USB/Bluetooth mode, press the play and pause
button to pause or resume the playback; In CD and USB mode, press the stop
button to stop the playback, and press play button for music resuming.
6. Selection by pervious and next button: Press it skip to last or next track
playback;
7. Fast-forward and fast-rewind: press it repeatedly to fast-forward or fast-
rewind the current track in 2/4/8/16/32 times speed, press it again to resume the
normal playback.
8. Repeat playback: In CD and USB mode, press repeat button repeatedly for
repeat one, repeat all and repeat off selection;
9. Random playback: press random button for random and random off
selection（function only available for CD format disc）.
10. Channel +/-: Press it to pick up last and next preset FM station.
11. CD disc eject: Press it to load a CD or close the CD door.
12. Intro: press it to playback the first 10 seconds of each track in CD and USB mode.
Press it again to cancel the Intro function.
13. System reset: In CD mode, press the reset button to reset the audio and factory
setting include EQ, treble, bass, and volume etc.
CD playback operation
This product includes CD playback function which can play with CD disc under CD/CD-R-
RW/MP3 audio format (DVD not include). Before start the CD playback, please check if
there have any dirty dot or scratch on the CD disc, otherwise the CD may cannot read out
or create noise sound.
1. Press the source button enter to CD mode.
2. Press the eject button open the CD door, and load the CD disc into the CD tray;
press the eject button again to close the CD door. The unit will start to read and play
the CD automatically.
3. A-B repeat function: During CD playback, press the A-B button first to define
the start point of track that you want to repeat; press the A-B button again to define
the end point of track; Then the unit will repeat play the music between the start and
end point. Press the A-B button again to cancel the function.
4. Create your own playlist (function only available for CD format disc, max
programed 9 tracks)
a. In CD disc playback mode, press the program button to start the program
operation.
b. The display will show " P- - C- -", press the digits button to select the track that
you want to be programmed. Press the 10 + button for selection in case of the
track number above ten.
c. Then the display will show P X X C XX. For example, "P01C12" means the number
12 track was programmed as the number 1 track.
d. Continue to select the track that you want to be programed till show "P09C XX"
on display.
e. Then press the play button to start the programmed playlist playing.
f. To cancel and remove the programmed playlist, press the program button
again, or eject the CD disc.
11