BMW G 650 Xchallenge Rider's Manual page 79

Remove screw 3 of speed sen-
sor and take speed sensor out
of holder.
Remove quick-release axle
nut 4.
Loosen lock nuts 5 on left and
right by turning counterclock-
wise.
Loosen adjusting screws 6 on
left and right by turning clock-
wise so that adjusting plate 7
can be removed.
Remove quick-release axle 8.
Roll rear wheel as far forward
as possible and remove
chain 9 from chain sprocket.
Roll rear wheel toward rear out
of swinging arm.
The chain sprocket and
the spacer sleeves on the
left and right are loosely inserted
in the wheel. When removing,
make sure that these parts are
not damaged or lost.
Installing rear wheel
Roll rear wheel into swinging
arm while guiding brake disk
between brake pads.
Roll rear wheel as far forward
as possible and lay chain 9 on
chain sprocket.
8
77
z