BMW G 650 Xchallenge Rider's Manual page 77

Installing front wheel
Insert spacer sleeve 7.
The front wheel must be
installed right way round to
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
Roll front wheel into forks while
guiding brake disk between
brake pads.
Install axle 5.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Install axle screw 3 with speci-
fied torque, bracing with screw-
driver on right-hand side if nec-
essary.
Nut on front quick-re-
lease axle
59 lb/ft (80 Nm)
Remove front wheel stand.
Without actuating brake: firmly
compress spring forks several
times.
Tighten the left-hand axle
clamping screws 2 with
specified torque.
Front axle clamping
7 lb/ft (10 Nm)
8
75
z