Table of Contents
Advertisement
Troubleshooting
Problem
Suggestion
I hear noise in
•
Make sure the telephone line cord is plugged in
securely.
the cordless
handset, and
none of the keys
or buttons work
•
Make sure you subscribe to caller ID with call
The system does
waiting features services provided by the local
not receive caller
telephone company.
ID or the system
does not display
•
The caller may not be calling from an area which
caller ID during
supports caller ID.
call waiting
•
Both you and the caller's telephone companies
must use equipment which are compatible with
caller ID service.
•
If you subscribe to DSL service, install a noise
filter to the telephone line between the telephone
base and the telephone line jack. Contact your
DSL service provider for filter information.
•
Make sure the answering system is on.
The answering
system does not
•
If Toll Saver is activated, the number of rings
answer after the
changes to two when there are new messages
correct number
waiting.
of rings
•
If the memory is full or if the answering system is
off, the system will answer after ten rings.
•
In some cases, the answering system may be
affected by the ringing system used by the local
telephone company.
•
When recording the announcement, make sure
The
you speak in a normal tone of voice about nine
announcement
inches from the telephone base.
message is not
clear
•
Make sure there is no background noise
(television, music, traffic, etc.) when recording.
17
Advertisement
Table of Contents
