Private, Phone, and PABX Calls
If you are in an on-going Group Call wish to make a new call,
press
How to Dial
Dialing via the Contact List
Due to limited keypad you can only use the contact list to select a
number you previously stored. Press Contcs and search the stored
number by scrolling (
one number, use
Private Call
A Private Call, also called Point-to-Point or individual call, is a call
between two individuals. No other terminal can hear the
conversation. This call can be:
• a full-duplex call (if the system allows) in TMO, or
• a standard half-duplex call in TMO or DMO.
Making a Private Call
1. From the Contact List dial a number.
In DMO the recipient you dial have to be on the same frequency
and group.
2. If Private is not the first type of call presented, press CType to
select the Private Call type.
3. For a half-duplex call, press and release the PTT button. You will
hear a ringing tone. Wait for the called person to answer your call.
Press and hold PTT. Wait for the talk permit tone (if configured)
before talking, and release the PTT when listening.
For a full-duplex call, press and release
ringing tone. Wait for the called person to answer your call.
to ignore the current call. Dial the number
or
/
to select the number.
). If the contact has more than
. You will hear a
.
31