Powering On/Off (On-Off/End/Home Key); Powering On (Emergency Button); Powering On With Transmit Inhibit (Txi) Active - Motorola TETRA MTP810 EX Basic User's Manual

Powering On/Off (On-Off/End/Home Key)

To power On, press and hold
performs a self-check and registration routine. After successful
registration, the MTP850 Ex/MTP810 Ex is in service.
To power Off, press and hold
Powering Off message is displayed.

Powering On (Emergency Button)

Press and hold the Emergency button to power On. The MTP850
Ex/MTP810 Ex will power On in Emergency Mode or in standard
mode (as programmed).

Powering On with Transmit Inhibit (TXI) Active

Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio-Frequency (RF) sensitive area. To activate
this feature, press
Mode > Activate.
The TXI Mode remains active at power On. You will be asked
whether to leave the TXI Mode On or not.
Press the Yes soft key to deactivate the TXI Mode. If the MTP850
Ex/MTP810 Ex was previously used in Trunked Mode, it will register
to the network. If the MTP850 Ex/MTP810 Ex was previously used
in Direct Mode, it will remain in Direct Mode.
Press No in Trunked Mode and the MTP850 Ex/MTP810 Ex powers
down; press No in Direct Mode and you remain in Direct Mode with
TXI selected.
24
. Your MTP850 Ex/MTP810 Ex
. You will hear a beep and the
and select More...> Networks > TXI
MENU
Pressing the Emergency button, even if Transmit
Inhibit is activated, causes the MTP850 Ex/
MTP810 Ex to transmit immediately. The MTP850
Ex/MTP810 Ex must NOT be within the RF sensi-
tive area when entering Emergency Mode.
Ensure you have left the RF sensitive area before
deactivating Transmit Inhibit.