Getting Started; Battery; Installing The Battery; Replacing The Battery - Motorola TETRA MTP810 EX Basic User's Manual

Getting Started

Battery

Installing the Battery

1. Remove the battery from its protective clear plastic case.
2. Insert the battery top into the compartment as illustrated.
3. Carefully slide the battery until it clicks into place.

Replacing the Battery

To remove the battery:
1. Lift the latch on the bottom as per markings.
2. Pull the battery out.
3. Replace the battery.

Charging the Battery

Motorola approved chargers provide optimum performance. Other
chargers may not fully charge your Motorola Lithium-Ion battery or
may reduce the life of the battery.
20
Battery changing is NOT allowed in gas and dust
environment.Battery replacing must occur ONLY
in non-hazardous areas.
Battery charging must occur ONLY in non-haz-
ardous areas. After charging, the radio must be
left to rest for at least 3 minutes.